- Adjust your heating curve
- Keep your heat pump on for extended periods
- Combine solar power, batteries and a time of use tariff
- Upgrade your radiators
- Optimise your Legionella protection
- Deal with problems straight away
- Bleed your ground loops (ground source heat pumps only)
- Check your heating boost setting
Heat pumps provide your home with energy efficient, low carbon heating. When you have your heat pump installed, your installer should set your heat pump to work as efficiently as possible.
Setting up a heat pump installation correctly is important to get the lowest running costs. Here are some common methods to improve your heat pump’s heating efficiency.
The installer should have left an information pack with instructions on how to adjust the more common settings on the heat pump. Speak to certified installer and ask them to check your installation and explain the settings to you if:
- you’re not confident in making these changes.
- you’ve moved into a property that doesn’t have the manuals supplied with the heat pump.
Eight top tips to make your heat pump more efficient
Adjust your heating curve
Also known as ‘outdoor weather compensation’, your heat pump’s heating curve is set by the installer when you first get your heat pump. If it’s not set correctly, it can increase your running costs. Let’s look at a heating curve in this graph.
![Line graph showing the heat pump weather compensation curve. On the x-axis is the outside temperature in degrees Celsius. On the y-axis is the heat pump flow temperature in degrees Celsius.](https://energysavingtrust.org.uk/wp-content/uploads/2024/02/heat-pump-weather-compensation-curve.png)
- The left of the graph shows the heat pump output temperature when the air temperature is minus fifteen degrees outside.
- The far right of the graph shows the output temperature needed when it is warmer outside.
It’s worth checking your heating curve has been set correctly. Sometimes installers will set the control curve conservatively (high) to make sure your house is warm in winter. But you may be able to reduce your heating curve significantly without having making your home feel too cold.
Leaving the heat pump on for longer periods can help too. This doesn’t increase your overall running costs because the greater efficiency offsets the longer running period.
Lowering the set temperatures at the left-hand side reduces the reaction time of the heating system. This means it takes longer to change the house temperature in cold weather, but it will also have a big impact on your running costs.
Try turning it down in one degree increments throughout winter until you’re confident you feel your home is too cold. Then put it back up one degree to stay comfortable.
Keep your heat pump on for extended periods
In the UK, we’re used to turning our heating systems on in the morning, off when we go to work and back on again in the evening when we return home.
In Europe, however, they’re more likely to keep their heating on for longer. And instead of turning it off, they lower the temperature by a few degrees overnight or during the day when out at work.
This is a good strategy for controlling heat pumps, which is known as a ‘set-back’.
Make sure your heat pump isn’t trying to heat the hot water cylinder or the house overnight when outside air temperatures reduce significantly. That’s unless you’re using a ‘time of use’ tariff where the electricity is cheaper.
During winter, the air temperature can drop by five degrees or more overnight. This will reduce the heat pump’s heating efficiency when working hard to heat hot water to a high temperature.
If the temperature of your home drops by a few degrees, your heat pump has to work a lot harder to warm it again. So, it’s best to keep your heat pump on all the time, and let your ‘set-back’ maintain a lower temperature when you’re out or asleep.
Combine solar power, batteries and a time of use tariff
You can maximise your savings and lower your carbon footprint even further by having your electricity come from a renewable source.
Combining solar panels with a home battery lets you store free, low carbon electricity to power your heat pump. This makes you less reliant on using electricity from the grid, bringing down your electricity bills.
The biggest benefit of a home battery comes in when you also have a time of use tariff. These tariffs encourage you to use your energy outside of peak times, with lower energy costs as a result.
Some smart tariffs can adjust your energy costs in line with the wholesale electricity price.
Upgrade your radiators
If you didn’t upgrade your radiators when you installed your heat pump, now’s the time to consider it.
If the radiator in each room of your home isn’t big enough, that room won’t get warm. It doesn’t matter how big or powerful your heat pump is. If the radiators aren’t big enough, the house won’t warm up using the lower temperature water that heat pumps deliver.
Your radiators might have been fine when connected to a boiler, which typically runs at 75 degrees. But if the temperature of the water in the system drops to 45 degrees, which is usual in heat pumps, your radiators won’t be big enough.
That’s if you continue to heat the house in the same way that you did with a boiler, like turning them on twice a day in the middle of winter.
Larger radiators mean more surface area to circulate heat. And you can get radiators that don’t take up extra wall space. These are called double or triple panel radiators.
For more information on making your home fit for a heat pump, read our in-depth heat pump guide.
Optimise your Legionella protection
UK building regulations advise that water cylinders (but not thermal stores) need to reach temperatures of more than 60 degrees on a regular basis. This is to protect against Legionella bacteria, which causes Legionnaire’s disease.
Your heat pump usually has this function on a timer to be done either daily, weekly, or permanently. If your bills are high, it may be because the timer has been set to do this job too frequently.
For most, it’s safe to use this function weekly. If you’re at home regularly, you don’t need to do this every day.
Deal with problems straight away
When your heat pump is installed, make sure you read your manual and understand the basics of both the control system and the heat pump itself.
If there’s something critically wrong with the heat pump, the control screen will tell you. Anything else is likely to be a design or control issue.
If you see warnings on the control screen, don’t ignore them. Check the fault log and see if you get recurring fault messages. Speak to the installer and manufacturer to find out what’s causing them.
It’s better to get these issues fixed quickly and reduce the risk of your heat pump breaking down in winter. A common fault is a ‘heating blocked’ message which might mean the heat pump has been set to run at temperatures that are too high.
Sometimes it’s a problem with the central heating system rather than the heat pump itself. Faulty pumps, valves or sludge and dirt in the radiators can all cause problems, which at first glance appear to an issue with the heat pump.
If you don’t have water treatment and a filter in your central heating system, look into getting one installed as soon as possible. Not having these will cause long term problems with the heat pump, which could be expensive to fix.
If you feel your installer isn’t taking your concerns seriously, speak to the manufacturer. They often have technicians that are more experienced at solving issues with your particular model.
Bleed your ground loops (ground source heat pumps only)
The ground loops in a ground source heat pump work just like in a radiator. Over time, air can get into the system and, if left unchecked, there might be occasional air locks that you need to bleed out.
Your ground source heat pump may have a pressure gauge showing the pressure in the ground loops. Make a note of what pressure the installer set it to and make sure it doesn’t drop below this level too much.
When you have a service, ask your technician for advice on how to spot potential issues and also how to bleed your ground loops if they need it.
Check your heating boost setting
Heat pumps can perform down to minus 15 degrees or lower, but there may come a point when the heat pump’s output isn’t enough for your heating needs. However, there aren’t many days in a year when we see these sorts of temperatures.
When temperatures plummet like this, the ‘heating boost’ or ‘heating comfort’ setting on your heat pump control panel can help.
The heat pump uses an additional heater element to add energy to the system, until the temperature outside is within the expected limits. It’s quite normal for the heat pump to need a little help in the coldest periods.
The heat pump doesn’t use this extra power for long, so it shouldn’t add much to your running costs, even over a whole year.
It’s possible that the heating boost wasn’t set up properly or was turned on and forgotten about. Read your manual and make sure you have the heating boost set to come on only when the temperature outside is low enough.
If you have to use this function regularly, speak to your installer as it might be a sign that:
- your radiators are to small.
- your heating curve isn’t set right.
Header image credit: Ben Whittle
Your top five tips to save energy in the kitchen
We asked for your eco-friendly tips for saving energy around the kitchen, including batch cooking and saving leftovers.
New government’s energy pledges: five things your business should know
We have a new UK Government, but what does its key energy pledges mean for your business?
Great British Energy: what we know so far
Great British Energy - or GB Energy - is one of the new government's key pledges. But how will this publicly owned…