The most economical ways to use your central heating

A room thermostat stops your central heating system using more energy than it needs to. It turns the heating on until the room reaches the temperature you’ve set. Once it reaches the set temperature, it turns the heating off until the temperature drops again.

You don’t need to turn your room thermostat up when it is colder outside. Your home will heat up to your chosen temperature whatever the weather, but it may take a little longer on colder days.

Remember: turning up your room thermostat won’t make your home heat any faster!

Also, bear in mind that room thermostats need a free flow of air to get a better sense of the temperature. Therefore, it’s important to make sure they’re not blocked by curtains or furniture and to keep them away from heat sources like radiators.

You should set your thermostat to the lowest comfortable temperature for your needs. For most people, this is between 18°C and 21°C.

If you can, turning down your thermostat from 22°C to 21°C can save £90 a year in GB and £100 in NI on energy bills.

A timer or programmer lets you control when your heating and hot water comes on and when it goes off.

This is useful because it means you can programme your central heating based on when you need it. For example, you can programme the heating system to switch off when you’re not at home or don’t need heating at night.

Using a programmer, you can set ‘on’ and ‘off’ time periods for your central heating. Typically, you should set the central heating programme to:

• Turn on around half an hour before you get up.
• Turn off around half an hour before you go to bed.

Check that the clock on the programmer is correct before you set your programmes. Many programmers will change automatically when the clocks change in spring and autumn. But if it doesn’t, you will need to remember to adjust it.

When you should turn your heating on will depend on your circumstances, but generally you should put it on when you start to feel cold.

Thermostatic radiator valves (TRVs) let you control the temperature of your individual radiators. This lets you turn down the heat in rooms you aren’t using.

TRVs work by sensing the air temperature around them. If the room is warmer than the setting on the TRV, the valve will close a little. This reduces the volume of hot water flowing into the radiator.

If the room temperature is lower than the valve setting, the valve opens, increasing the flow of hot water into the radiator.

TRVs usually have a scale from 0 – 6, where zero (0) is off and six (6) is fully open. You should aim for the lowest setting that keeps the room at a comfortable temperature. Doing this will reduce the volume of hot water flowing into the radiator, using less energy and saving you money.

For example, you might want to set the TRV at 3 to 4 for rooms you use the most but turn it down to 2 to 3 for bedrooms and rooms you use less. While you can turn TRVs down to reduce the temperature and save on heating costs, remember: if it’s too cold, turn it up a little.

Did you know? Adding TRVs to a system that already has a programmer and thermostat can save £35 a year in GB and £45 in NI on energy bills.

Your boiler should have a dial or a digital temperature setting, usually marked in numbers or from minimum (min) to maximum (max). This sets the temperature of the water that’s pumped from the boiler through the radiators to heat your home. This is known as the boiler flow temperature.

If it’s not set high enough when it’s very cold outside, your home may not reach the temperature you need to be comfortable.

If you have a heat pump, read our guide to making your heat pump more efficient.

You can control your boiler via an app on your phone. These smart heating controls connect to the internet, letting you access and adjust them remotely.

One advantage of a smart heating control system is that you can make changes remotely if your plans change. This is useful if you’re going to be home later than you thought, for example. You can use smart heating controls to have your heating come on later so you’re not heating an empty home .

Some smart heating controls can learn what temperature you like and how quickly your home warms up to adjust settings to minimise energy use. This will need very little input from you once the system has been set up, making it a convenient option.

We recommend getting your boiler or heat pump serviced every year to make sure it’s running properly. The cost of a service will vary depending on where you live and how much work is needed. This will help make sure your system is running at its most economical.

Renting your home? Your landlord should arrange and pay for the service.

Sign up to Energywire, our monthly newsletter full of news, advice and tips on energy saving and renewable energy options.

Sign up to our newsletter