How to keep your house warm in winter

Make sure your home isn’t letting the heat escape. Around 18% of a home’s heat loss escapes through windows, and 3% through doors.

You can get professional draught-proofing to maximise your home’s energy efficiency. But if you prefer the DIY option, you can buy draught-proofing strips for your windows and doors.

Draught-proofing windows and doors can make your home a more comfortable place to live and could save you £40 a year in Great Britain (GB) and £45 in Northern Ireland (NI). And adding a draught excluder to your chimney could save you £55 in GB and £65 in NI.

Insulating your hot water pipes is a quick and easy way to save energy. As well as reducing heat loss from your system, pipe lagging will also prevent pipes from freezing and bursting.

Pipe insulation is an easy DIY install – you can buy foam insulation tubes online or from a DIY store and slip them over your pipes. Foam pipe jackets cost around £18 to install and you will save around £5 a year in GB and £6 in NI. It also reduces the risk of expensive repair bills from burst pipes.

Cold spots caused by trapped air could mean your radiators aren’t working as efficiently as they should be. You can get a radiator bleeding key from most DIY shops and it’s an easy way to heat your home with less effort.

Maximise the heat from your radiators by installing reflective radiator panels. These stop heat being lost in the walls and reflect it back into the room.

Installing reflective radiator panels in a house with uninsulated solid walls could save you up to £25 a year in GB and £25 in NI.

Top tip: Move any furniture away from your radiators, and remove any radiator covers. This makes sure no heat is being lost.

Room thermostats allow you to set and maintain the temperature at home. A programmer sets the heating to turn on and off at certain times of the day to suit your lifestyle. Thermostatic radiator valves (TRVs) let you control the temperature of each radiator, so you’re only heating the rooms you need.

Installing and using a full set of heating controls means that you can be warm exactly when and where you want in your home. You could also save around £110 a year in GB and £120 in NI if you currently don’t have any of these heating controls.

Nearly all UK hot water cylinders have some insulation, but those with a hot water tank jacket under 25mm thick could benefit from top-up insulation.

Topping up your hot water cylinder insulation from 25mm to an 80mm jacket could save around £40 a year in GB and £45 in NI.

Most homes have some loft insulation, but many don’t have enough. The recommended depth is 270mm.

Topping up your loft insulation from 120mm to 270mm will help stop warmth escaping through the roof and could save you around £20 a year in GB and £25 in NI.

If you currently have no insulation in your loft, installing 270mm of new insulation could save £230 a year in GB and £260 in NI.

Modern boilers are more efficient than older models. If your boiler is more than 10 years old it will be far less efficient than a newer model, so consider replacing it with a more efficient condensing boiler.

How much you can save depends on what kind of boiler you’re replacing. Replacing a G-rated boiler with an A-rated one could save you £250 a year in GB and £280 in NI.

If you already have a modern, efficient boiler, make sure you get it serviced once a year. This makes sure there’s no build up of sludge and that the boiler it working at maximum efficiency.

Although wall insulation is a bigger investment, and costs vary, it can keep your home warm and cosy and result in a large saving.

Most homes built after 1920 have cavity walls. If your home’s cavity walls are uninsulated, adding cavity wall insulation could save up to £240 a year in GB and £270 in NI.

Most homes built before 1920 have solid walls. Solid wall insulation can save around £320 a year in GB and £370 in NI.